Danaher Tool #30251 3/8" & 1/2" Chuck Key

Buy Cheap Danaher Tool #30251 3/8" & 1/2" Chuck Key

Buy Low Price From Here Now
Jacobs, 3/8" & 1/2" Chuck Key, 1/4" Pilot Shank.
Readmore

Technical Details

- Danaher Tool #30251 3/8" & 1/2" Chuck Key
- DANAHER TOOL GROUP
See more technical details

Images Product

Buy Danaher Tool #30251 3/8" & 1/2" Chuck Key Now

Gear Wrench 9900 7-Piece 10mm to 19mm Flex Ratcheting Box End and Open End Combination Wrench Set

Buy Cheap Gear Wrench 9900 7-Piece 10mm to 19mm Flex Ratcheting Box End and Open End Combination Wrench Set

Buy Low Price From Here Now
Sets - Wrenches Tool Type: Metric Flex Head Set Measurement Type: Metric Metric Size: 10, 12, 13, 14, 15, 17, 19 Number of Pieces: 7 Size Range: 10-19mm Finish/Coating: Chrome
Readmore

Technical Details

- Patented surface drive reduces fastener rounding.
- Flex head tilts up to 180 degrees at any interval
- Set screw allows you to set head tension
- Ratcheting box-end needs as little as 5 degree turn to move fastener.
- Designed for tight spaces.Sleek head design enables access to tight spots where a ratchet will not fit.
See more technical details

 "Difficult to change direction" 2009-06-15
By J. Gangloff (Upstate New york)
Very well made tool but if I had to do it over again I would have bought the Craftsman because it has a lever to change direction. With the Gear Wrench you have to turn the tool over to change direction. This is very annoying when you have a blind nut, finally get the ratchet end of the wrench on the nut, and then you realize it is going the wrong direction so you have to remove the wrench, turn it over, and start all over.

 "Very nice if Amazon would ever get them in stock" 2009-02-03
By Daddy Fix (Warrenton, VA)
Very nice wrenches, but shame on Amazon and Gearwrench. I ordered these two months ago, and they still have not shipped. Price has been jacked up $9 since I ordered. Amazon sent me an email asking if I still wanted them. Heck yes, I'm not cancelling so Amazon can get out of shipping to me at the old price! But why is Amazon still taking orders for these when Gearwrench apparently never supplies them!!! Not up to the usual Amazon service standards. You get one star because of the lousy service Gearwrench.

 "THE BEST RATCHETING WRENCHES EVER!!" 2007-11-08
By Michael Kaplan (Phoenix, AZ)
I went over to a friends house to work on my truck, he had a newly built and stocked garage so he had all the cool tools I wish I had. While under the truck trying to get at a oddly positioned bolt I asked him for a 14mm wrench, he hands me this weird floppy thing. I ask him what the heck is this and he says just try it. I look at in the light of the trouble light stick my finger in the box end and turn it...OH, this looks cool. I put it on the bolt and it fits right on, the flexible head allowed me to move the wrench without banging up my knuckles and the ratcheting....well it was a beautiful thing. That bolt didn't have a chance. I used several more sizes of these wrenches and was so impressed I went straight down to Sears that day, after searching we found the GearWrench wrenches, but right next to them were the Craftsman. Now I think, oh, these have to be even better, their Craftsman. After playing with the Craftsman I was SEVERLY disappointed, the ratcheting was loose and clumsy. They just didn't 'click' like the GearWrench, and you had to move the wrench more to get one 'click'. The GearWrenches seem to be better designed and made and were cheaper. SOLD!! It was a no brainer. Now don't get me wrong, I love my Craftsman tools, and my GearWrenches sit in the drawer, right next to my other Craftsman wrenches, but when the job calls for a ratcheting wrench...I go for the GearWrenches. Buy these, you will never regret it.

 "Great tool" 2007-04-21
By J. Signorino (Austin, TX)
You won't go back to using your regular open end wrenches after using these. They are quality made, get into and work in very tight spaces, are very fast to use with the ratchet, only take 5 degrees of turn to reach the next ratchet catch point, the smooth finish helps keep them clean, their grip on nuts and bolts is superior to standard open end wrenches so you get less of a rounding affect, adapt to the angle you need and they are for a GREAT price from Amazon.



I'm so glad I made this purchase.

 "GREAT TOOLS" 2007-01-05
By Lee
The Gear Wrench Flexible Ratcheting Wrenches have became my primary wrenches of choise. They are strong,ratchet very easily and for hard to get to or tight areas they are priceless.


Images Product

Buy Gear Wrench 9900 7-Piece 10mm to 19mm Flex Ratcheting Box End and Open End Combination Wrench Set Now

Danaher Tool Group 82106 Double X Plier Set - 2 Piece

Buy Cheap Danaher Tool Group 82106 Double X Plier Set - 2 Piece

Buy Low Price From Here Now
Item #: KDT82106.

Features & Benefits

• Compound joint allows access with minimal handle movement, jaws open greater distance than the handle for added reach in tight locations
• Flush rivet for strength and narrow profile
• Dual dipped grips for comfort and grip
• Aligned serrated tips for precision gripping
• Corrosion resistant alloy steel

Maximum reach without exceeding center point of interference. Set includes: 13" straight Double-X™ pliers with 3" jaw capacity and 12.75" 45 degree Double-X™ pliers with 1.75" jaw capacity. Packaged in a tray.
Customers also search for: Discount 2 Piece Double-XT Pliers Set, Buy 2 Piece Double-XT Pliers Set, Wholesale 2 Piece Double-XT Pliers Set, 099575821165, ToolWeb, Pliers
Readmore

Technical Details

- Designed with a compound joint that allows access with minimal handle movement
- Features flush rivet for strength and is made of corrosion resistant alloy steel
- Includes dual dipped grips for comfort and aligned serrated tips for precision gripping
- Dual dipped comfort grip
See more technical details

 "Very Handy Tool" 2008-09-06
By SeaWolf's Home Workshop Blog (Florida)
Although not as narrow an opening as I expected, these pliers are a great improvement for getting into tight places. GearWrench 82007 Duck Bill Double X Pliers complete the set.

 "Perfect Tool For Hard to Reach Areas!" 2008-04-29
By S. Kent
Standard needle nose pliers just don't cut it in really confined hard to reach areas. This tool has the deepest reach of any pliers I have ever seen. The best part is the double joint allows minimal handle movement for really tight areas. Good quality tools, I would definitly buy again.


Images Product

Buy Danaher Tool Group 82106 Double X Plier Set - 2 Piece Now

Danaher Tool Group KDS2031 Cutter Exhaust and Chain TypeTailpipe

Buy Cheap Danaher Tool Group KDS2031 Cutter Exhaust and Chain TypeTailpipe

Buy Low Price From Here Now
Chassis/under Carriage Tools Type: Exhaust & Tailpipe Cutter
Readmore

Technical Details

- Designed to aid in various automotive service tasks
- Constructed from high quality material
- Works in hard to reach areas
See more technical details

 "Exhaust Pipe Cuuter" 2007-06-01
By D. Olson (Texas USA)
I needed a mobile tool to cut 3" exhaust pipe to install Chrome exhaust tips. Although a SawsAll works it is not always the best in the environment I operate in. This tool fits the bill and works as designed.

 "Very Poor Performance" 2005-03-12
By RacerRoy (Pennsylvania USA)
I've just spent an hour trying to cut through a 2" piece of exhaust tubing, and this exhaust cutter has fallen apart no less than 5 times. It's barely cutting, and what it is "cutting" is threads, not a nice clean cut. It's almost impossible to get enough clamping force on this thing to even make a dent in the tubing.



I'm not sure where the "1/4 turn for a full cut" came from, but for sure it is not from reality. I don't know what I'll do now, as I cannot drive my car to inspection because of the huge slice in the tubing because the portion of the tube it DID cut is only about 90° worth.



The advertising for this product is false, and I will do my best to inform the other engineers and mechanics that I work with of the low quality of this tool.


Images Product

Buy Danaher Tool Group KDS2031 Cutter Exhaust and Chain TypeTailpipe Now

Danaher Tool Group 82400 Flexible Hex Key Set - 5 Piece

Buy Cheap Danaher Tool Group 82400 Flexible Hex Key Set - 5 Piece

Buy Low Price From Here Now
KD TOOLS - KDT-82400 - 5PC SAE FLEX HEX KEY SET
Readmore

Technical Details

- Designed with a 180 degree flex head and is made of black oxide
- Attributed as a substitute for hex bits
- Includes a canvas pouch for compact storage
See more technical details

Images Product

Buy Danaher Tool Group 82400 Flexible Hex Key Set - 5 Piece Now